Using the Meeting Room Equipment - Zoom (and anything else)

Firstly Join your Zoom call as normal from your laptop.

On the desk there will be a Yealink dongle.

1. Plug this into your laptop. If you device does not have a USB Port pull the USB off to access the USBC underneath.

2. Once you plug it in it will have a yellow light, press and hold the circle button until it turns Green which should be about 4 seconds.

3. On the TV screen an option will pop up saying "Enter BYOD?" Click OK.

4. Once this is done make sure your camera and microphone settings are changed to Yealink.

You will also need to make sure you are screen mirroring.

To view the guide on how to screen mirror Click Here